Welltech WR5100 V.1.0 - Manual (Page 11)

Welltech Computer Co., Ltd.
System
Start Path: Configuration > System
Figure 3.1-1
Parameter Description:
• SIP Proxy IP Address: SIP proxy IP
• RTP Start Prot: RTP used port
• Prot Interval: UDP port used for RTP stream, each channel needs 3 RTP
ports and must be started by a multiple of 10
• Enable System Log: Enable to send system information to syslogD
server or not
• SyslogD Server IP 1, 2: syslogd server IP address
• SMTP Server: SMTP server host for email notice
• Email From: Email sender account
• Email To: Email receiver (semicolon is used for multiple receiver)
• Subject: Email subject to be send to receiver. The following variable
parameters can be used to create dynamic subject for system notice:
o
$LOGLEVEL$: Information Level
o
$HOSTNAMEZ$: Host name
o
$HOSTIP$: Host IP address
Advance System Configuration:
Start Path: Configuration > System > License
Figure 3.1-3
License Parameter Description:
• Feature: System parameter
• Serial No: System parameter
WellSIP Telephony Server – V2.0 - 11 -