Welltech LP-803 Installation - Manual (Page 3)

Step 3 : Go to SIP Service Æ Service Domain at LP803 Web page to set up SIP account in
details. For Example :
Active: On
Display Name: Enter phone number or user name
User Name: Enter phone number or user name which were given by ITSP or IPPBX.
Register Name: Enter phone number or user name which were given by ITSP or
IPPBX.
Proxy Server: Enter DNS name or IP address which were given by ITSP or IPPBX.
Step 4 : Switch Line number among Line1, Line2 and Line3
- Line Line Number + * + Dial Number
LP-803 will dial Tel number on Line Number
Example: 2*0933751706 Î Dial 0933751706 on Line 2
- Line Number + * + #
Dial tone on desired Line Number can be heard.
Example: 2*# Î use Line2 to dial.
Step 5 : Go to SIP Service Æ Codec Setting at LP803 Web page to set up voice codec
priority and DTMF mode.
Step 6 : Go to SIP Service Æ Other Settings at LP803 Web page to set up SIP Expire time
which is used to register to SIP Server time. The most frequent time is 300 seconds. But it
still depends on SIP server configuration and IP Network performance.
3