Welltech LP-803 Installation User Manual

Page 2

OK key and then go back to

[1] IP Type.

Step 2 : Go to

[2] Fixed IP Setting

[1] IP Address

, and enter IP address. For Example :

192.168.001.002

Step 3 : Press OK key and go back to

[1] IP Address

[2] Subnet Mask

, and enter Subnet

Mask. For Example : 255.255.255.000.

Step 4 : Press OK key and go back to

[1] IP Address

[3] Default Gateway

, and enter its

address, for example : 192.168.001.254.

Step 5 : Press OK key and go back to

[3] Default Gateway

, and continue to press MENU

Key until Please Reboot appear to restart LP803.

How to configure WAN port to DHCP from LCD panel ?

Step 1 : Go to

[4] Network

[1] WAN Setup Æ [1] IP Type Æ [2] DHCP Client

, and

Press OK key.

Step 2 : Continue to press MENU Key until Please Reboot appear to restart LP803.

Step 3 : Press MENU Key and go to

[4]Network

[5] Status

to check if there is any IP

address available at WAN port.

2. Use Web Browser of PC to configure further features

Step 1 : Setup your PC IP address the same IP segment with LP803 WAN IP address as

above, for example: 192.168.1.3

Step 2 : Activate IP Web Browser and enter http//192.168.1.2:9999 to access LP803 WAN

port. You will see the following web page from LP803.

Username: root

Password: test