Wavecom W-Sat-email-Decoder V2.3.1 - Manual (Page 34)

30  Glossary of Terms WAVECOM Sat email Decoder W-Sat-email-Decoder V2.3.1
The entire call number is transmitted by consecutive tones in decade sequence. When two identical digits
are to be transmitted consecutively, then an eleventh frequency is used as a repetition identifier. If there
more than two identical digits are to be transmitted the repetition tone is appended to the digit tone (e.g.
22222 is transmitted as f2 fw f2 fw f2, where f2 is the tone for “2” and fw is the repetition tone).
In most systems the accuracy of the single frequencies has to be within +1/-1.5% of the nominal value.
Modifications of the tone allocation and tone duration has led to numerous systems despite many stand-
ards.
Only the EURO (EuroSignal) system uses six consecutive tones. The worldwide telephone signaling stand-
ard DTMF mode transmits two simultaneous tones.
Server
See file server.
Shift
The difference between two tones in a FSK transmission.
Size control
A screen element found on WINDOWS that allows you to change the window size.
SNAC
Single Network Access Code.
SNR
Signal-to-Noise.
Space
Application Condition Condition
Voltage to signal ground Negative (-) Positive (+)
Conventional term MARK SPACE
Binary digit value 1 0
Timing signal state Off On
FSK signal state Lower frequency Higher frequency
Spinner
A control that allows you to increment or decrement numbers either by typing the numbers or clicking the
UP and DOWN arrow keys.
String
An item of information consisting of a sequence of text characters.
SW
Software.