Watson-Marlow 323Dz - Manual (Page 36)

Watson-Marlow 323Dz User Manual 36
If you select Menu, the pump displays the main menu. See 15 Main menu.
Batch pause
You can interrupt a batch at any time by pressing STOP. The pump stops and offers
four choices: Unpause: continue the dose sequence from where it was stopped;
Restart: start the dose or the batch from the beginning; Re-calibrate: re-calibrate
the pump; and Exit: abandon the batch and return to the main menu.
Use the UP and DOWN keys to make a selection. Press RETURN to confirm.
Unpause: If you choose Unpause the pump finishes dispensing the current
dose and completes the batch.
Restart: If you choose Restart the pump displays the number of doses in the
batch and the number which have been completed. It offers two choices: restart
the interrupted dose or restart the batch. Use the UP and DOWN keys to make
a selection. Press RETURN to confirm.
Select Restart dose and the pump re-dispenses the interrupted dose and
resumes the batch where it was interrupted - as in the example shown
above.