Watson-Marlow 120F/DV - Manual (Page 4)

Watson-Marlow 120 IP31 pumps: general information 2
1.1 Declaration of
conformity
This declaration was issued for Watson-
Marlow 120 pumps on April 28, 2010.
When this pump unit is used as a stand-
alone pump it complies with: Machinery
Directive 2006/42/EC, EMC Directive
2004/108/EC.
This pump is ETL listed: ETL control num-
ber 3050250. Cert to CAN/CSA std C22.2
No 61010-1. Conforms to UL 61010-1.
1.2 Declaration of
incorporation
When this pump unit is to be installed into a
machine or is to be assembled with other machines
for installations, it must not be put into service until
the relevant machinery has been declared in con-
formity with the Machinery Directive 2006/42/EC.
Responsible person: David Cole, Managing Director,
Watson-Marlow Limited, Falmouth, Cornwall TR11
4RU, England. Telephone +44 (0) 1326 370370 Fax
+44 (0) 1326 376009.
The information in this user guide is believed to be
correct at the time of publication. However, Watson-
Marlow Limited accepts no liability for errors or
omissions. Watson-Marlow has a policy of continu-
ous product improvement, and reserves the right to
alter specifications without notice. This manual is
intended for use only with the pump it was issued
with. Earlier or later models may differ.
The most up-to-date manuals appear on the
Watson-Marlow website:
http://www.wmpg.com
1.3 Three-year
warranty
Watson-Marlow Limited (“Watson-Marlow”) war-
rants, subject to the conditions and exceptions
below, through either Watson-Marlow, its sub-
sidiaries, or its authorised distributors, to repair or
replace free of charge, any part of the pump drive
which fails within three years of the day of manu-
facture of the product. Such failure must have
occurred because of defect in material or workman-
ship and not as a result of operation of the product
other than in normal operation as defined in this
pump manual.
Watson-Marlow shall not be liable for any loss, dam-
age, or expense directly or indirectly related to or
arising out of the use of its products, including dam-
age or injury caused to other products, machinery,
buildings, or property, and Watson-Marlow shall not
be liable for consequential damages, including,
without limitation, lost profits, loss of time, incon-
venience, loss of product being pumped, and loss of
production. This warranty does not obligate Watson-
Marlow to bear any costs of removal, installation,
transportation, or other charges which may arise in
connection with a warranty claim.
Conditions of and specific exceptions to the above
warranty are:
Conditions
Products must be returned by pre-arrangement,
carriage-paid, to Watson-Marlow, or a Watson-
Marlow approved service centre.
All repairs or modifications must have been
made by Watson-Marlow Limited, or a Watson-
Marlow approved service centre or with the
express permission of Watson-Marlow.
Warranties purporting to be on behalf of
Watson-Marlow made by any person, including
representatives of Watson-Marlow, its sub-
sidiaries, or its distributors, which do not accord
with the terms of this warranty shall not be
binding upon Watson-Marlow unless expressly
approved in writing by a Director or Manager of
Watson-Marlow.