VXL Instruments Itona D Series Thin Client - Service Manual - Manual (Page 8)

Pedestal and Side Cover 4
Note: Retain the screws for future use.
5. Slide the side cover and remove it as shown in Figure 4.
Figure 4: Removing Side Cover
Fixing the Pedestal and Side Cover
To fix top cover, pedestal and power adapter:
1. Gently press the side cover downwards.
2. Using the star screwdriver (Item B in Figure 1) tighten the two screws holding the side
cover.
3. Fix the pedestal and lock it.
4. Switch on the power to the client.