VXL Instruments Itona D Series Thin Client - Service Manual - Manual (Page 14)

Replacing Motherboard 10
7
Replacing Motherboard
To replace the motherboard:
1. Remove the power adapter, pedestal and side cover. For more information see, section
‘Error! Reference source not found.’ on page 3
2. Apply isopropyl alcohol on the glue holding the connectors, pull the glue out using the
nose pliers.
3. Unplug the USB, COM3 port and audio cable as shown in the following figure.
Figure 12: USB, COM3 and Audio cables
4. Remove the motherboard screws.