Visara 5350 Quick Start User Manual

Page 21

Quick Start Guide

Chapter 2 Setting Up Your Printer

GLIS

The printer motors run for 2 or 3 minutes when you first turn the power on.

While turned on, the printer will go into the standby state if it remains idle for a period of time.

When you have finished using the printer for the day or you do not intend to use
it for a long period of time, switch off the power.

The top line of the LCD display reads:

Followed by asterisks progressing across the
bottom line:

Following an LED self test, asterisks progress
across both lines of the display, the beeper
sounds …

… and the Power On Self Test ends with the
top line of the display reading:

**************

**************
**************

Initializing

Ready

9035 Quick Start Guide-en.book Seite 17 Donnerstag, 9. November 2006 3:12 15