Visara 5350 Quick Start - Manual (Page 20)

Chapter 2 Setting Up Your Printer Quick Start Guide
16
Connecting the
Power Cord
Turning the
Printer On
1 Connect the power cord to the
power cord connector at the back
of the printer.
2 Make sure that the power switch
has been firmly pushed to the
<O> position and then insert the
other end of the power cord to a
correctly rated power outlet.
If the power cord has an earth
wire, connect it as well.
1 Press the power switch to the
<I> position the power on.
9035 Quick Start Guide-en.book Seite 16 Donnerstag, 9. November 2006 3:12 15