Vir2 Instruments Studio Kit Builder - Manual (Page 8)

STUDIO KIT BUILDER
SYSTEM REQUIREMENTS
The Macintosh version requires an Intel Core Duo, 2GB of RAM, a DVD drive,
and OS 10.6.8 or 10.7.x. For optimum performance, Vir2 Instruments
recommends a 2.0GHz processor or faster. The library requires 9GB of free
hard drive space.
The Windows version requires Windows 7 (latest Service Pac, 32/64 Bit)
Intel Core Duo or AMD Athlon 64, 2GB of RAM, a DVD drive. For optimum
performance, Vir2 Instruments recommends a 2.0GHz processor or faster.
The library requires 9GB of free hard drive space.
The library requires approximately 9GB of disk space.
INSTALLING
The installation of STUDIO KIT BUILDER consists of two separate steps: the
installation of the Kontakt engine, and the installation of the STUDIO KIT
BUILDER library.
In the STUDIO KIT BUILDER folder, you will see the installers for Kontakt 5
and the STUDIO KIT BUILDER library folder. Move the STUDIO KIT BUILDER
library folder to any location on your hard drive, then run the Kontakt 5
installer.
The Kontakt installer will install the Kontakt engine, its standalone
application, all of its plug-in versions, and the Service Center authorizer
program. We recommend the Easy Install and that the install locations for
each component are left at their default settings.
The STUDIO KIT BUILDER library is approximately 2.3GB in size, and can be
installed on any available hard drive. For speed reasons, we recommend it be
STUDIO KIT BUILDER/
REQUIREMENTS
AND
INSTALLATION
CHAPTER 02
03
CHAPTER 0
2
/ REQUIREMENT
S AND INS
TALLA
TION