Verilink NetPath 2000 Product Manual - Manual (Page 21)

C o n f i g u r a t i o n 3-3
Link-Recovery Displays the number of times the PCMCIA card has lost connection and the
NetPath 2000 has had to reestablish connection to the wireless network.
Sys-Uptime Displays the time since reboot or power cycle. This is router operational time,
not wireless connection time.
NOTICE: Sys-Uptime indicates router operational time, not wireless connection
time.
NAT Indicates whether NAT is enabled on the Branch Router interface.
Values: ON, OFF
SNMP-Mgt Indicates whether the NetPath 2000 can be configured and monitored from the
wireless network.
Values: ON, OFF
Interface Lists the NetPath 2000 interfaces.
Values: Local-Mgt, Router, VPN, Wireless
IP-address Displays the IP address of each interface.
Net-Mask Displays the net mask address of each interface.
DHCP-Serving Displays the current DHCP setting for the two Ethernet interfaces.
Values: ON, OFF, N/A
RX-OK Displays the number of receive packets without errors.
RX-ERR Displays the number of receive packets with errors.
RX-DRP Displays the number of receive packets missing.
RX-OVR Displays the number of receive overruns.
TX-OK Displays the number of transmit packets without errors.
TX-ERR Displays the number of transmit packets with errors.
TX-DRP Displays the number of transmit packets missing.
TX-OVR Displays the number of transmit overruns.
Administration-Level Status and Configuration Display
Configuration control is permitted only at the administration-access level. The
default administration password is “admin.” This password is case sensitive.