Delta DTT2450 - Manual (Page 6)

CARTON CONTENTS
6- ENG
A04032
Bagged Parts
Engine Frame and
Wheel Assembly
Chemical
Hose
Spray Gun
Multi-Adjustable Spray Wand
Engine
Manual
Accessories Panel
Accessories Panel
English/
Spanish/French
Operation
Manual
High Pressure
Hose
Engine
Oil
Handle
Allen Wrench and
Cleaning Tool
ASSEMBLY INSTRUCTIONS
3. Attach high
pressure hose to
gun. Tighten se-
curely.
1. Place handle assembly onto frame,
depress the snap buttons, and slide
the handle assembly onto the frame
until snap buttons snap into place.
2. Connect wand to gun.Tighten
securely.
4. To Assemble Accessories Panel
a. Remove top
screws on
handle
assembly.
b. Loosen
bottom
screws on
handle
assembly.
c. Place grooves in accessories
panel assembly onto screws
and slide panel assembly into
place.
d. Place screws (removed earlier)
into the top holes and secure
accessories panel assembly
to handles. Do not
overtighten.
5. Add engine oil (supplied) to
engine. Refer to Engine Owners
Manual supplied by engine
manufacturer for correct
procedure.
NOTE: There will be a slight amount of
oil in the engine from factory testing.
Remove
Loosen
Screws