The main menu, Interpreting the main menu – Verilink Craft Interface (No Part Number) Product Manual User Manual

Page 3

Using the Craft Interface

Verilink Craft Interface

Craft-3

The Main Menu

Figure 2 defines the parts of the Main Menu.

Figure 2 The Main Menu

Interpreting the

Main Menu

The Main Menu shown in Figure 2, provides:

•

a shelf/slot display showing card and shelf types and card
locations in each shelf

•

a key to the letters representing modules in the slots

•

a command list

•

node information

•

firmware revision number

-- VERILINK SCM CONTROLLER : FW Rev 1.18, Aug 24 1998 20:04:56 --

-- VERILINK SCM CONTROLLER : FW Rev 1.18, Aug 24 1998 20:04:56 --
Site name: SCM Tutorial Access level: 2

Site name: SCM Tutorial Access level: 2

Site name: SCM Tutorial Access level: 2
Managing at NEAR end node [0.0.0.2] Node id: 122

Managing at NEAR end node [0.0.0.2] Node id: 122

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 M [*S] D Q Q I M H - - - - - -

1 M [*S] D Q Q I M H - - - - - -

1 M [*S] D Q Q I M H - - - - - -
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -
KEY: D=QUAD D, I=IMUX, M=M13, Q=QUAD T1, S=SCM

KEY: D=QUAD D, I=IMUX, M=M13, Q=QUAD T1, S=SCM

S) shelf/slot O) administration

S) shelf/slot O) administration
C) configuration D) diagnostics

C) configuration D) diagnostics

C) configuration D) diagnostics
P) performance/status A) alarm

P) performance/status A) alarm

P) performance/status A) alarm
B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info

B) circuit manager I) manufacturing info
X) logoff

X) logoff

A [0.0.0.2] [1,1] SCM >

Menu Heading Area

Shelf/Slot Map

Command List

Firmware Version and Date of Release

Access Level (1-4)

Node Address

Node Address (Not IP Address)

Data (Command) Entry Area

Module Key

Active SCM Master Designator

❷

❸

❶
❷
❸

❶

Asterisk indicates that the SCM is the Shelf Controller

Indicator for the type of shelf: M= Multi-line, D = Dual-line

Brackets around module letter ( [P] ) indicate current module selected