Venstar T0051FS - Manual (Page 18)

Advanced Setup
Page 17
Step # Description Range Factory Default
9 35 - 99 76
10 Minimum allowable Cool setpoint 35 - 99 68
11 Heat Pump On / Off On
12 Reversing Valve Polarity O / B O
13 Electric Heat On / Off Off
14 Fan Speeds 1 - 3 1
15 Deadband 1 - 6 2
16 Minimum differential - Heat / Cool 0 - 6 2
17 Cycles per Hour Limit d, d1, 2 - 6 d
Maximum allowable Heat setpoint
Advanced Setup Table
19 Fahrenheit or Centigrade F / C F
18 Backlight On / Off On
** These unoccupied setpoints are used only when the Dry
Contact is asserted.
1 Time of day clock set 24 hour 12:00 Am
2 Display Mode 0 - 3 3
3 Dry Contact Sense NC /NO NO
4 Dry Contact Latch Off / On Off
5 Unoccupied Cool setpoint** 35 - 99, OF OF
6 Unoccupied Heat setpoint** OF, 35 - 99 OF
7 This setup step is unused N/A N/A
8 This setup step is unused N/A N/A