VAUDE Hogan UL Argon 1-2P - Manual (Page 20)

13
tEChniCal DEtailS:
Depending on tent models, VAUDE tents feature
the following:
fEaturES/faBriCS:
SILICON SEAM SEAL:
VAUDE is the only manufacturer to successfully fac-
tory seam seal siliconised tents for full waterproof
protection!
SILICONIZED:
• Increases tent life by 20% - a triple coating reflects
damaging UV radiation to a much greater degree
than standard treatments.
• 8-times greater tear resistance – siliconized fabrics
attain a tear resistance of 8-11 kg compared to 1.3
kg of PU coated fabrics.
• Excellent water beading properties – water simply
beads on the surface.
• Retensioning – the polyamid carrier material
swells up when damp or wet. The tent needs to be
retensed if rain/snow initiate.
• Sealing – siliconized materials cannot be factory
seam sealed (exception: VAUDE Silicon Seam Seal).
When camping in extremely rainy conditions we
recommend sealing all seams by hand with a silicon
seam sealer.
flY:
TEAR-RESISTANT 40D POLYAMIDE RIPSTOP 240T SI/SI;
WATERPROOF TO 3,000 MM.
• High resistance to tearing due to tensile polyamide
cotton with embedded strengthening fibres.
• Triple silicon coating to the outer and inner surfaces
for maximum tear-resistance and water run-off, as
well as increased UV-resistance.
innEr tEnt:
30D POLYESTER RIPSTOP 285T.
285T – tightly woven ripstop polyester. Wind, sand and
snow proof with high tear resistance and breathability.
ENGLISH