VAUDE Campo Family XT 5P - Manual (Page 17)

10
ENGLISH
5. Connect the hooks inside the tent to the poles (D).
6. Throw over the outer tent (E) and secure to the pole
crossing point with a tab (E1); then attach the
Velcro fasteners to the pole (E2). Do not secure the
outer tent to the feet using the buckles yet.
7. Insert the shorter pole (a2) into the pole sleeve (a)
and push into the external sockets at the foot. Now
push the outer tent buckles into the relevant feet (f).
8. Anchor the porch and, if necessary, guy ropes.
9. Ensure there is sufficient ventilation.
taKE DoWn – gEnEraL InStrUCtIonS:
• Remove everything from the tent’s interior.
• Freestanding tents can be gently shaken out to
remove leaves, sand, and other debris.
• Turn the tent over with floor facing upward and
allow it to dry a bit longer.
• If it’s not possible to dry the tent completely before
packing it, this should be done within 12 hours to
prevent the risk of mold and mildew growth.
• As in the tent set up, never pull the poles out of the
pole sleeves; rather push them through.
• When storing a tent in its stuff sack, make sure that
stakes and poles don’t press against the tent fabric
and damage it.
• Before taking down your tent, close all zips and
roll up the guy lines. That way you won’t have to
untangle them when it comes time to set the tent
up again, and pitching is that much easier.
DISmantLIng – “moDEL-SpECIfIC”:
1. 1. Pull out the tent pegs and undo the fixings of the
poles and let the outer tent collapse.
2. Fold up the poles and roll them up with the tent,
if possible. Do not force the poles into the storage
bag, if it is full.
StoragE/CarE/rEpaIrS:
• As soon as the tent is dry and clean it can be stored
in its pack sack in a well-ventilated, cool and dry
place. Please do not store the tent near paints, ad-
hesives, oils, plastics, or fuels (gas canisters, etc.)!
The gasses emitted from these materials contain
plasticizers that can damage your tent over time.