Vantage Point SSB30 - Manual

Preview all steps before beginning. Should any portion of these instructions be unclear, contact us direct at 800-582-9595 for assistance. Do not attempt to
assemble this Vantage Point Speaker Stand if you have any doubts as to its proper assembly and installation. CAUTION - Do not exceed maximum weight
indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Use of this product for any other purpose unless
specified by Vantage Point Products is not recommended. Think safety first!
∆ INDICATES TO NOTE CAUTION WHICH IF NEGLECTED MAY RESULT IN AN IMPROPER OR UNSTABLE ASSEMBLY.
Vantage Point Products Corp. • P.O. Box 2485, Santa Fe Springs, CA 90670 U.S.A.
USA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056
• Web Site: www.vanptc.com • Email: [email protected]
PARTS LIST
A Cast Iron Speaker Base 2
B Riser Skirt Upper/Lower 4
C Riser Spacer 12
D Aluminum Riser 2
E Speaker Plate 2
F Rubber Stem Bumper 8
G Adhesive Backed Rubber Foot Pad 6
H #10 x 5/8” Pan Head Screw 8
I #8-16 x 1/2” Pan Head Self Threading Screw 12
J 1/4”-20 x 1-3/4” Pan Head Machine Screw 4
K 1/4”-20 x 3-3/4” Pan Head Machine Screw 4
Maximum Speaker Weight: 25 lbs.
SSB30 rev3-12-07
(C)
(B)
(A)
(F)
(H)
(K)
(I)
(G)
(E)
(D)
(J)
(B)
(C)
(I)
(J)
(K)
24” 30”
SSB30 Adjustable Speaker Stand
Assembly Instructions