TS Performance 9210201 - Manual (Page 6)

Installation: Module
Mounting location
1. You can mount the MP-HD module anywhere away from
extreme environments. There’s plenty of room in the
harness to mount away from heat. We recommend
connecting it to a wire harness or other flat surface using the
supplied zip ties and/or velcro. Just be sure the module is
tightly secured to prevent damage.
6 7
Installation: Power and Ground
Power
1. Route the RED power wire from the module to a clean 12
Volts. On most applications the alternator is located close
by.
Ground
2. Route the BLACK ground wires from the module to clean
chassis ground or directly to battery, usually the alternator
on the passenger side of the vehicle is sufficient and easily
accessed.