TS Performance 9210201 - Manual (Page 5)

8
On the 12.9L engine our MPHD will connect to the top
connector on the factory computer on the left side.
Simply disconnect the factory harness and connect our
harness as shown above
Installation Overview
4
On the 10.3L Engine the MPHD will plug into the
connector to the far right on the computer. Simply
disconnect the factory harness and connect our harness
as shown above..
10.3L
12.9L
Installation: Plug&Play
Harness Connection
•Connect the factory harness that you disconnected from
the computer and connect it to the MPHD harness. Make
sure to line the tab on our connector up with the cut out on
the factory connector.
•The connector should latch and be secure when properly
installed.