Dakota Digital LED Tail Lights LAT-NR150 User Manual
Dakota Digital Furniture
MAN#650177
INSTALLATION INSTRUCTIONS
LAT-NR150
LED Tail Lights for 1970-72 Nova
MAN#650177
Kit Includes:
Installation:
1. Remove the tail light lens.
2. Remove the light bulb
3. Remove the original bulb connector from the back side of the housing.
4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
5. Remove the two screws and mounting plate from the side of the new LED assembly.
6. Insert the new LED assembly into the taillight housing and route wires through the hole where
the original bulb and connector were located. Use caution when feeding the wires through to