Tri Tool CBM-3 Counterbore Module - Manual (Page 8)

8
TRI TOOL INC.
92-0227 : Rev. 070529
Clearance
The rotating parts diameter is equal to the rotating parts diameter of the
Clamshell on which the Model CBM-3 Counterbore Module is mounted.
Length
14.60” (370.8 mm) from the face of the Clamshell.
Taper Boring Adjustment
Up to 30° chamfers or up to 30° lead-out angles following a counterbore
(Max. of 2.00” [50.8 mm] deep).
Feed Length
6.00” (52.4 mm)
Axial Feed Rate
.010” (.25 mm) per revolution
Counterbore Run-Out
.005” per inch (.13 mm per 25.4 mm)