Tri Tool 576AC Chipless Sever Module - Manual (Page 8)

92-0854 : Rev. 030318
TRI TOOL INC.
8
All Components should be cleaned and coated with a light film of oil prior to use.
Use a clean non-detergent oil, preferably SAE 10 (90 SSU) or lighter.
Daily Maintenance should include a visual inspection of all parts for damage due
to chips, impact or improper use.
Repair or replace broken or damaged parts as necessary.
Wipe the machine clean of cutting fluids, dirt and grime and then coat it with a light
film of oil.
Lubricate the slides on the carriage block, the hinges, cutter wheel and the pivot
posts.
Thoroughly clean and check the Chipless Sever Module in the event of feed prob-
lems.
If the Chipless Sever Module is to be stored or if it will remain out of service for a
significant period of time (30 days or more), it should be thoroughly cleaned, lubri-
cated and sprayed with a rust preventative prior to storage.
MAINTENANCE
Daily Maintenance Schedule:
After every 20 hours of operation:
Non-scheduled Maintenance:
Storage: