Tri Tool 304 Tube Squaring - Manual (Page 9)

9
Model 304 Tube Squaring Machine
92-0749 : Rev. 110328
1 1/2" through 4" pipe
Schedule 5 through schedule 40
Basic Tube Sizes
.250" (6.35 mm) to 4.50" (114.30 mm) OD
Wall Thickness Capacity
Basic Tubing with a maximum wall thickness of .250" (6.35 mm)
Material Cutting Capabilities
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and
aluminum without limitations other than size and wall thickness as specified.
Inconel and some other high-temperature alloys may require special proce-
dures as a function of wall thickness and type of end preparation. Contact
TRI TOOL’s Engineering Department for details.
Speeds
Speed Control
Electric Drive
Dual range, variable speed.
Pneumatic Drive
On/Off trigger and twist type air flow control valve.
Electric Drive Motor Free Speed
900 RPM (Low)
2800 RPM (High)