Tri Tool 301SP Tube Squaring - Manual (Page 13)

13
Model 301SP Tube Squaring Machine
92-0579 Rev. 130308
CAUTION:
Do not let the tool bit touch the tube or pipe. To do so will cause damage to
the tool bit or the Tube Squaring Machine when power is applied.
Tighten the Clamp Knob Assy to tighten the tube in the Saddle.
Connect the Model 301SP to the power source and pull the Trigger to start rotation
of the Cutting Head.
The Feed Handle is used to feed the Shaft with the tool bit into the work.