Tri Tool 206B Miter Mandrel - Manual (Page 8)

8
TRI TOOL INC.
92-0448 : Orig. 930630
MAINTENANCE
Tri Tool Miter Mandrels are precision tools that will perform excellently if they are well
maintained.
Keep the Miter Mandrel clean.
Brush away any chips or other debris with a soft bristle brush.
Wipe the Miter Mandrel down with a lightly oiled rag.
Inspect the Miter Mandrel before each use. Check for stripped threads, burred,
worn, or missing parts, and replace as necessary.
Occasionally back off the Miter Head and remove it from the Miter Mandrel
Check all parts for cracks, burrs, etc.
Remove the (4) four Angular Offset Adjusting Screws.
Maintenance of the Miter Mandrel
Check the spherical bearing surface for burrs and/or other defects.
Do not reuse any parts that show evidence of cracking, bending or over stressing.
Apply a very thin film of general-purpose grease or anti-seize to the spherical
surface.
Oil all of the Screws and threads, and re-assemble in the reverse order of
disassembly.