Tri Tool 201BA Beveler - Manual (Page 11)

11
Model 201BA BEVELMASTER TM
92-0631 : Orig. 960119
If the Model 201BA BEVELMASTER TM is to be left idle for 24 hours or more after
being run on ‘wet’ air, it is advisable to squirt oil directly into the Air Motor inlet and
run the Motor for 2 to 3 seconds.
This will prevent rusting and ‘freezing’ of the Rotor Vanes.
LUBRICANT RECOMMENDATIONS
The Air Motor requires a Class 2 lubricant, viscosity of 100 to 200 SSU at 100 O F
(38 O C) minimum aniline point of 200 O F (93 O C).
TRI TOOL Inc. – Air Tool Lubricant (P/N 68-0022)
AMOCO – American Industrial Oil No. 32
Atlantic Richfield – Duro Oil S–150
Chevron – A.W. Machine Oil 32
Exxon – Nuto H32
Shell – Tellus Oil 32
The bearings in the Air Motor are sealed and do not require any lubrication.
The Drive Gears require a high string utility grease