Tri Tool 200B Elbow Mandrel Square Plate - Manual (Page 9)

9
Models 204B, 208B and 214B Squaring Plate
92-1499 : Orig. 100920
Slide the Squaring Plate Assembly and mandrel into the end of the elbow/pipe.
The three (3) extension arms should be in contact with the end of the elbow/pipe.
Turn the nut on the end of the elbow mandrel to extend the centering pins out to the
elbow ID.
Once the centering pins are tight against the wall, loosen the thumb screw.
Slide the Squaring Plate Assembly off of the mandrel.
The mandrel is now ready for the Model 200B to be mounted.
OPERATION
For operating instructions refer to the Model 200 Series and Accessories avail-
able.
Elbow
End
Squaring
Palte
Adapter
Nut
Thumb
Screw