Tri Tool 200B Elbow Mandrel Square Plate - Manual (Page 8)

8
TRI TOOL INC.
92-1499 : Orig. 100920
SETUP AND OPERATION
Always read the operating instructions carefully/completely before attempting to
operate any of the BEVELMASTER
® Series.
SETUP
Secure the three (3) extension arms on the Squaring Plate Adapter.
The end of the pipe elbow will be in contact with each when the center of the
pipe elbow is roughly the same as the center of the Squaring Plate Assem-
bly.
Slide the Squaring Plate Assembly over the back of the mandrel shaft.
Tighten the thumb screw to secure the Squaring Plate Assembly to the mandrel
shaft.
Elbow
Mandrel
Squaring
Palte
Adapter
Extension
Arm
Thumb
Screw