Safety, Warning – Dixon 13087-0400 User Manual
Page 6
Page 6
SAFETY
This cutting mower is capable of amputating hands & feet, and throwing objects.
Failure to observe the following safety instructions could result in
serious injury or death.
WARNING
:
The engine exhaust from this product contains chemicals known to the
State of California to cause cancer, birth defects or other reproductive harm.
GENERAL OPERATION:
•
Read, understand, and follow all instructions in the manual and on the mower before starting.
•
Only allow responsible adults, who are familiar with the instructions, to operate the mower.
•
Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.
•
Be sure the area is clear of other people before mowing. Stop mower if anyone enters the area.
•
Never carry passengers.
•
Do not mow in reverse unless absolutely necessary. Always look down and behind before and while
backing.
•
Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower
without either the entire grass catcher or the deflector in place.
•
Slow down before turning.
•
Never leave a running mower unattended. Always turn off blades, set parking brake, stop engine, and
remove key before dismounting.
•
Turn off blades when not mowing.
•
Stop engine before removing grass catcher or unclogging chute.
•
Mow only in daylight or good artificial light.
•
Do not operate the mower while under the influence of alcohol or drugs.
•
Watch for traffic when operating near or crossing roadways.
•
Use extra care when loading or unloading the mower into a trailer or truck.
Do not ride the mower when loading & unloading.
•
Always wear safety goggles or safty glasses with side shields when operating mower.
•
Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-
related injuries. These operators should evaluate their ability to operate the riding mower safely enough
to protect themselves and others from serious injury.
•
Follow the manufacturer's recommendation for wheel weights or counterweights.
•
Maintain or replace safety & instruction labels, as necessary.