Thunder Tiger ESS-TT - Manual

ESS-TT Engine Sound System
 Please read the instructions about the amplifier carefully, as incorrect settings may
cause damage to the speaker.
Packing List
 ESS-TT X 1
 T type AMP power cable X 1
 Quick Guide X 1
 Double-sided adhesive X 2
 USB CableＸ１
Product Specifications
 Supply voltage range：5Volts-26Volts
 Speaker Impedance：4Ohms
 Output power under 4 Ohms：20W/3S(12V)
 Number of audio channels：ONE channel 30W max
 Output is Short-Circuit, Overload and Thermally Protected
 The output power of the amplifier varies with voltages. The volume can be adjusted
to control the power if necessary, when amplifier are fully loaded. The speaker Can
be damaged by high volume under high voltage. Please refer to detailed
instructions on www.thundertiger.com.
Warning : Reverse power can damage the speaker system
5、Connect USB to PC
4、Connect to RX TH
2、TH signal
1、AMP Power input
 Enter Calibration mode：Press & hold the“+” 1S，after“DI---”sound，release the
button, ESS-TT enters the Setup mode”;
 Neutral Calibration : make sure the TH at Neutral, Click the “+”, after “DI”sound,
the neutral calibration finishes.
 Forward TH calibration：Pull the TH trigger to max throttle position，click the “+”，
after＂DI＂sound, forward TH calibration finishes.
 Backward TH calibration：Push the TH stick to max brake position, click the “+”, after
“DI”sound, the brake TH calibration finishes.
 After the steps above, "DI---", calibration is completed. Calibration mode exits
automatically.
 In process, you can quit the calibration mode by pressing “-”, with "DI -------" .
Volume can be setup by clicking +/-，Increase：“+”，Decrease：“-”.
With power-on, the ESS-TT is still in an off state. The engine starts upon the pull of the
throttle. Then ESS-TT generates engine sound according to the throttle signal. It
automatically turns off when the throttle is in neutral position for 5 seconds(default
setting).
The additional features of ESS-TT include rev.limiter, shifting, braking, turbo sound effects
and battery low voltage warning, etc. can be adjusted with RC-PLUS.
RC PLUS is a software which integrates configuration, audio stores, video services, which
extends the ESS-TT's powerful function. You can visit website to download the RC PLUS
program and get more information.
http://www.thundertiger.com/download/rcplus.exe
 The 2S lithium battery is recommended. Higher voltage is not advisable.
 To avoid the damage to the speaker, volume should be adjusted before sound
distortion with 3S lithium battery or above(Advisably under volume level 4).
Statement
The speakers are consumables. Users need to strictly control the volume so that the
output power can match the speaker. Speaker damage caused by output power is not
categorized as manufacturing defect.
Quick Guide
3、Connect to ESC
Volume adjustment
Start ESS-TT
Other functions
About RC PLUS
 The amplifier should be well ventilated.
Warning
Speaker Description
 With only "DI, DI, DI" sound, the calibration fails. It returns to the neutral calibration to
re-calibration.
 ESS-TT supports up to 6S lithium battery and 30W power output. So adjust the
volume to match the power output or damage can occur.
 Maintaining max throttle for a long time is not recommended, as
damage may happen under high power output.
Yo ur ES S-TT Eng in e So und Sys tem i s warranted to the ori gi nal pu rch aser fo r 30 days fro m the date of purchas e, verifi ed by th e s ales receip t,
against defects in material and wo rkman ship. Pro duct that h as been mis hand led , abu sed, us ed inco rrectly, us ed for an ap plication o ther than
in tended , water damag ed, or damag ed by the u ser are n ot co vered und er warran ty. Thu nder Tig er Inc. is n ot li ab le for any l os s or damage ,
whe ther d irect or ind irect, in ci den tal o r co nseq uenti al, or from any s pecial s itu ation , aris in g fro m th e u se, mis us e, or abu se of this p rod uct .
 Y LineＸ１
 ESS-TT is not waterproof nor water resistant, avoid contact with water.
 Model: SI-30S1230C
Connect ESS-TT
 MUST plug form “Cathode”for dual battery
series connection to avoid short-circuit !!!
Calibrate ESS-TT