Universal remote control – Directed Video MCB1000 User Manual
Page 7
© 2001 Directed Electronics, Inc.
7
REMOTE CONTROL OPERATION
1.
MAIN POWER - Turns power to the
MCB1000 on/off.
2.
PWR/SOURCE - Turns monitor power
on/off and changes the video source.
3.
FM MOD - Turns the power to the RFM100
FM modulator on/off if connected to the
MCB1000 FM modulator control output.
4.
ZONE BUTTONS - Selects which monitor
zone of the MCB1000 the remote control
will operate.
5.
MENU/ADJUST BUTTONS - Accesses the
setup menu and hardware programming
menus for the MCB1000.
NOTE: Refer to the On-screen Programming section for
programming information.
6.
NUMERIC BUTTONS - Use to choose spe-
cific TV channels.
7.
CHDN/CHUP - Changes channels if the
TVM300 TV tuner is connected.
8.
AUTO MEM - Activates the auto channel
learn of the TVM300 TV tuner.
9.
VCR CONTROL - Controls the basic
functions of the VCR.
REMOTE CONTROL BATTERY
INSTALL/REPLACE
1.
Slide battery compartment cover out from
back of remote control.
2
Insert two AAA batteries.
3.
Slide battery compartment cover back in.
Universal Remote Control