DirecTV HD65W20 - Manual (Page 24)

Using the Remote
20 Chapter 2
Remote Control Buttons
ON•OFF When the remote control is in TV or DIRECTV mode, ON•OFF turns
the TV on or off. If in another component mode, (VCR, DVD, etc.) and
programmed, the remote will turn the component on and off. When pressed twice
within two seconds, all components that are on will be turned off (this feature
only works with most RCA, GE, and PROSCAN products).
VCR1 Places the remote control in VCR mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct video input channel for viewing VCR1.
TV Turns on the TV and tunes to the last-viewed TV channel. Also places the
remote control in TV mode. Placing the remote in TV mode enables you to access
the TV’s menu system as well as tune to analog, digital, or cable TV channels.
DVD Places the remote control in DVD mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct video input channel for viewing your
RCA, GE, or PROSCAN DVD player.
VCR2 Places the remote control in VCR2 mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct video input channel for viewing VCR2.
(LED) Light that indicates you’re in programming mode when programming the
remote control. Also displays when a valid remote control button is pressed.
AUX Places the remote in auxiliary mode in order to control the component
(such as a laserdisc player) that you have programmed it to control. Acts as a
“wildcard” button, as it can be programmed to control another VCR, cable box,
satellite receiver, or an RCA, GE, or PROSCAN audio component.
DIRECTV Places the remote control in DIRECTV mode, turns on the TV, and
tunes to the last-viewed DIRECTV ® channel. If you subscribe to DIRECTV ®
programming, you must be in DIRECTV mode to view DIRECTV ® channels.
Placing the remote in DIRECTV mode enables you to access the TV’s menu system
as well as tune to DIRECTV
® channels.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore
volume.
SKIP Press once before changing channels and the TV will return to the original
channel after 30 seconds. Press repeatedly to add more time. If no other displays
are present, pressing CLEAR will cancel the commercial skip timer.
CH +/- Scrolls up or down through the current channel list. Press once to change
the channel up or down; press and hold to continue changing channels. If you are
in TV mode and press CH+/-, you scroll through TV channels. If you subscribe to
DIRECTV
® programming and are in DIRECTV mode, you scroll through DIRECTV ®
channels. In DVD mode, CH +/- will skip chapters on a disc played by RCA, GE,
or PROSCAN DVD players.
VOL UP/DOWN Adjusts the TV’s audio volume.
FETCH Brings up the Fetch menu, which is a list of most commonly accessed
menu items.
STOP PAUSE
TV
AUX DVD DIRECTV
PIP SWAP
RECORD
WHO CH CTRL
PLAY FORWARD REVERSE
FETCH GO BACK
V
O
L V
O
L
SKIP MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1 2 3
4 5 6
7 8 9
0
INPUT
VCR1
VCR2
ON • OFF
CH +
CH -
L.E.D.