Thermon KSR-CFK - Manual (Page 2)

KSR-CFK Power and End Termination Kit (per cable)
Tools Required . . .
The following installation procedures are suggested guidelines
for the installation of termination connection systems. They are
not intended to preclude the use of other methods and good
engineering or field construction practices.
Receiving, Storing and Handling . . .
1. Inspect materials for damage incurred during shipping.
. Report damages to the carrier for settlement.
3. Identify parts against the packing list to ensure the proper
type and quantity has been received.
4. Store in a dry location.
Installation Precautions . . .
• To minimize the potential for arcing and fire caused by product
damage or improper installation use ground-fault protection.
The National Electrical Code (NEC) and Canadian Electrical Code
(CEC) require ground-fault protection of equipment for each
branch circuit supplying electric heat tracing.
• Installation must comply with Thermon requirements and
be installed in accordance with the NEC, CEC, or any other
applicable national and local codes.
• Power connections and end termination must be located in
NEMA 4 or 4X enclosures (Thermon KSR-JB or UL Listed
equivalent) located above moisture line.
• De-energize all power sources before opening enclosure.
• Keep ends of heating cable and kit components dry before and
during installation.
• Component approvals and performance ratings are based on
the use of Thermon specified parts only.
• The kit instructions should be used in conjunction with the
installation instructions for the heating cable and other accessory
items.
KSR-CFK
1
Item Quantity Description
1 1 RTV Tube
1 Power Connection Boot
3 1 End Cap
3
Kit Contents . . .
Canadian Standard Association
Certified Snow Melting Equipment
for Applications Having a Type
Designation of B
Underwriters Laboratories Inc.
5N3 De-Icing and Snow Melting
Equipment (KOBQ)