Thermo Technologies SBB Solar Storage Tank - Manual (Page 3)

4. Technical Specifications
Components of the SBB…K Sol
1 Signal Anode
2 Memory Container
3 Immersion Sleeve for temperature probe-boiler
4 Link for thermometer or circulation
5 Port for heating element
6 Immersion Sleeve for temperature probe-solar
7 Revisions flange, outside
8 Expanded polystrene-thermal insulation
9 Cold water inlet
10 Solar return
11 Solar heat exchanger
12 Solar inlet
13 Heater return
14 Upper heat exchanger
15 Heater inlet
16 Warm water outlet
Diag. 1.
4.1 Technical Data
Type SBB 300 plus SBB 400 plus SBB 600 plus
Contents
Storage capacity Gal / ltr 80.6 / 305 108.6 / 411 162.9 / 617
Volume of heat exchanger, top Gal / ltr 1.9 / 7.3 2.2 / 8.2 2.5 / 9.6
Volume of heat exchanger, bottom Gal / ltr 2.7 / 10.1 2.9 / 11.3 3.5 / 13.2
Pressure
Working pressure PSI / bar 150 / 10 150 / 10 150 / 10
Tested to pressure PSI / bar (15) / 217 (15) / 217 (15) / 217
Max. pressure of boiler loop PSI / bar 150 / 10 150 / 10 150 /10
Temperature
Max. temperature solar loop °F / °C 203 / 95 203 / 95 203 / 95
Max temperature boiler loop °F / °C 203 / 95 203 / 95 203 / 95
Heat exchanger
Surface area heat exchanger top sq. in. /m2 1705 / 1.1 2015 / 1.3 2325 / 1.5
Surface area heat exchanger bottom sq. in. /m2 2325 / 1.5 2635 / 1.7 3100 / 2.0
Weights
Tank weight empty lb. / kg 339 / 154 412 / 187 544 / 247
Tank weight full lb. / kg 1,051 / 477 1,362 / 618 1,955 / 887
Other
Standby losses in 24 hours kWh 1.9 2.2 2.9
Cold/hot water connection for 1” copper pipe w/adapters, provided w/ unit
1