Teo PS-50 ISDN - Manual (Page 2)

Tone Commander PS-50 ISDN Power Supply Installation Instructions
Page 2 13-280105 Rev. A
• Do not obstruct the fan on the rear panel of the unit.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Mounting
The PS-50 can be mounted in an EIA standard 19” commercial or 23” telco rack, or wall mounted.
19” Rack Mounting
1. Attach the long sides of the mounting brackets to the PS-50 as shown in Figure 1, using the supplied
mounting bracket screws.
2. Mount the PS-50 to the rack standards using suitable fasteners.
Figure 1 – 19” Rack Mounting
23” Rack Mounting
1. Attach the short side of the mounting brackets to the PS-50 as shown in Figure 2, using the supplied
mounting bracket screws.
2. Mount the PS-50 to the rack standards using suitable fasteners.
Figure 2 – 23” Rack Mounting