Tech Source Raptor X11R6.1 for AIX - Manual (Page 16)

Raptor X11R6.1 for AIX Installation Manual
3-4
Note: Use
“-d” for temporary change of display until the next
reboot, or
“-p” to make a permanent change of display
If the Raptor card is the only graphics device in the system, it will
automatically be configured as the default LFT (console) device.
3.4 Supported Resolutions
3.4.1 Raptor 2000-12M, Raptor 2000-24M, Raptor
2000-24M AIX, Raptor 2100T
The resolution for Raptor 2000-12M, Raptor 2000-24M, Raptor
2000-24M AIX and Raptor 2100T is fixed at 2048x2048.
3.4.2 Raptor 1100T
The Raptor 1100T card is capable of supporting multiple resolutions
and is software configurable. See Section 4.3.2 for details.
3.4.3 Raptor 2500T
The resolution for Raptor 2500T card and Raptor 2500 FPS Digital
Flat Panel subsystem is set as 2560x2048.
The resolution for Raptor 2500T card and Raptor 2100 FPS Digital
Flat Panel subsystem is set as 2048x2048.