Tech Source Raptor X11R6.1 for AIX - Manual (Page 12)

Raptor X11R6.1 for AIX Installation Manual
2-4
2.4 Installation of the Raptor 2100 FPS
The Raptor 2100 FPS is comprised of the Raptor 2500T graphics
card (configured for 2048x2048 resolution) and the Tech Source
2100 FPS digital flat panel, along with associated cables and
software. The subsystem is connected together as shown in Figure
2-2.
Figure 2-2 – 2100 FPS Digital Flat Panel Subsystem
The Raptor 2500T card has one connector on the front bracket.
One side of the provided cable has the LFH60 connector that
connects to the graphics card. The cable splits into two with
MDR26 connectors on the opposite end. These two connectors
marked A & B get connected to the appropriately marked
connectors on the back of the digital flat panel. They are shown in
Figure 2-2. On some models of the digital flat panel, the
connectors may be recessed. In this instance, please remove the
back panel, plug the cables into the two marked connectors and
restore the back panel.
A B