Tech Source Raptor DL-Lite Drivers for AIX - Manual (Page 19)

Chapter 4 - Invoking X11R6.1
4-5
#xinit -- $X11R6HOME/bin/Xtsi –Pll rapdlt0 –cc 4
NOTE: This method of setting the default visual has an effect only
in the 8+24-bit mode.
4.3.2 Setting the Resolution
The resolution of the Raptor DL-Lite cards is fixed at 2560x1600.
4.4 Enabling MOX Extension During
X11R6.1 Server Startup
By default, the X11R6.1 server starts in an 8-bit mode. However,
on Raptor DL-Lite cards you may start the X11R6.1 server with
MOX extension enabled. (Details of the MOX Extension to X
Server are in separate technical white paper documentation.)
These MOX modes are available on Raptor DL-Lite cards:
mox16
MOX, 8-bit Normal, 13-bit Group, 5-bit Absolute
mox24
MOX, 8-bit Normal, 21-bit Group, 13-bit Absolute
mox32
MOX, 8-bit Normal, 29-bit Group, 21-bit Absolute
To enable MOX on a Raptor card, set the bit-depth to one of the
MOX modes. Please refer to Section 4.3.1 for details.
4.5 xdm
The X Display Manager (
xdm
) program is used for running multiple
users on the same host machine.
xdm
provides services similar to
those provided by
init
,
getty
and
login
on character terminals
prompting for login name and password, authenticating the user,
and running a session. It provides a login window for each user or
selected users.
Several files that are required to start
xdm
are provided in the