Dodge 2006 DR Ram SRT-10 - Manual (Page 80)

• For identification purposes, you will be prompted to
give the UConnect™ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect™ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect™ System. The priority allows the
UConnect™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect™
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to
ЉAdvanced Phone
Connectivity Љ section).
Dial by Saying a Number
• Press the ’Phone’ button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉDial.Љ
• System will prompt you to say the number you want
call.
• For example, you can say Љ234-567-8901.Љ The phone
number that you enter must be of valid length and
combination. The UConnect™ limits the user from
dialing invalid combination of numbers. For example,
234-567-890 is nine digits long, which is not a valid
phone number - the closest valid phone number has
ten digits.
• The UConnect™ system will confirm the phone num-
ber and then dial. The number will appear in the
display of certain radios.
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE