Teac LS-301 - Manual (Page 2)

2
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up the speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting the speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before use Table of contents
Safety instructions
Checking the included accessories
In the unlikely event that any of the following included items is missing or
damaged, please contact the store where you purchased the product .
Speaker cables (1 .8 m or 6') × 2
Cork speaker feet × 8
Owner's manual (this document) × 1
o Keep this manual in a safe place for future reference .
Warranty × 1 (for customers in the USA and Canada only)
o See page 23 for information about the warranty in Europe and other
countries or areas .
Product registration
Customers in the USA, please visit the following TEAC website to register
your TEAC product online .
http://audio .teac .com/support/registration/
Precautions for use
o Do not strike the enclosure (cabinet) or front surface Saran Fiber with hard
objects . Doing so could cause scratching or damage the speaker units .
o Avoid contact with rubber and vinyl for long periods of time, because it
could damage the surface .
o This product has been designed to minimize magnetic effects, but you
should not place cards, tapes and discs that use magnetic recording or
other items that are easily affected by magnetic force on top of it . Failure
to do so could result in data loss or damage .
o Listen within an appropriate input level range from the amplifier .
Excessive input could damage the speaker units .
Moreover, even if the input level is less than the maximum, signals with a
frequent clipping, for example, will have a negative impact on the speaker
units . Please be careful to prevent distortion of the audio at the amplifier .
Cleaning
o When the surface becomes dirty, use a soft dry cloth to wipe it clean . Do
not wipe it with finemeshed cleaning cloths, chemical cleaning cloths,
thinner, abrasives or similar materials . Doing so could damage the surface .
o Use a clothing brush or a similar tool to remove dust that sticks to the
Saran Fiber .
Company names and product names in this document are the trademarks or
registered trademarks of their respective owners .
Thank you for choosing TEAC .
Read this manual carefully to get the best performance from this unit .
To use this product safely
V CAUTION
Please read the following cautions carefully in order to prevent injury to
yourself or others and damage to property .
Before connecting to an amplifier or similar equipment, turn off the
power, carefully read the manuals of the equipment that you are
connecting and follow their instructions.
Always use the specified cords to make connections.
Minimize the volume before turning the power on.
Failure to do so could cause sudden loud noises that might harm your
hearing or cause other trouble .
Do not install in an unstable location, such as on an unstable stand
or on a slope, or in a location with frequent vibrations.
It could fall down or fall over, causing injury .
Do not use for long periods of time to listen to distorted audio.
Doing so could cause the speaker units to generate heat, leading to fire or
injury .