Teac KS-6001 - Manual (Page 11)

11
KS-6001
Technical notes and specifications, etc.
Inputs
Input level (4 channels) MIC – 70 to –30 dBs (balanced
inputs)
LINE –20 to +4 dBm (balanced
inputs)
Input impedance MIX 1.2 kΩ
LINE 600 Ω
Headroom > 30 dB (pre-fader)
Phantom powering either 48 V (maximum
current of 8 mA) or A-B
12 V (maximum current of
40 mA)
High-pass filter –12 dB/octave, sweepable
cutoff between 20 Hz and
200 Hz
Outputs
Output level –20 dBs (from a 7-pin Cannon connector,
electrically balanced, low-impedance output
Maximum output +8 dBs (into 600Ω)
Performance
Figures measured when connected to KS-342.
Frequency response 50 Hz to 15 kHz, < ±1.0 dB
Signal-to-noise ratio MIC at –70 >55 dB (30 kHz LPF/RMS)
LINE at +4 >68 dB (30 kHz LPF/RMS)
Total harmonic distor-
tion
LINE
< 0.5% (50 Hz thru 15kHz, nominal level)
MONI
< 0.5% (50 Hz thru 15kHz, nominal level)