Teac CD-H750 - Manual (Page 12)

12
3 Use the Skip/Search (.m/,/) buttons to turn it
ON/OFF.
Each time you press a Skip/Search (.m/,/) button
the setting switches between ON and OFF.
4 Press the Stop (8) button to confirm the setting.
This product is compliant with the European ErP Standby Power
Regulation.
Under any of the following conditions, the unit will switch to standby
mode if no operation has occurred for 30 minutes or more.
Status CD USB flash drive iPod/iPhone
No disc or connection   
Stopped/paused   -
Recording paused -
 Automatic power saving function active
- Automatic power saving function not active
/ Not applicable
Changing the automatic power saving (ECO
Mode) setting
1 Put the unit into standby.
2 Press the STANDBY/ON and Stop (8) buttons at the same
time for at least three seconds.
The current ECO Mode setting is shown.
Example:
ECO Mode ON
Current setting
About the ErP