Synaps THD-2800s - Manual (Page 9)

9 THD-2800s
Channel Search
When you enter to “Installation” menu, there will
display the screen like below:
Press [Up/Down] key to select menu items among
each item. Press [OK] key to enter the selected item.
Auto Scan
When you enter to “Auto Scan” menu, there will
display the screen like below:
Firstly please select the country in System Setup
Menu / Region and Time / Region, such as “France”.
In “Scan Mode” item, press [Left/Right] key to select
scans all channels or just scans free channels. Move
the highlight to “Search” item and press [OK] key to
start scanning.
In the “Auto Scan” menu, press [Exit] key to draw
back from the scanning.
Manual Scan
When you enter to “Manual Scan” menu, there will
display the screen like below
When you complete your modification, move highlight
to “Frequency channel” item and press [OK] key,
then it will begin to scan. Press [Exit] key to exit the
scanning.
Country
Select the country which you are in. You can press
[Left/Right] key to select each mode circularly.