Synaps THD-2800s - Manual (Page 6)

6 THD-2800s
Features
Fully compatible with DVB-T FTA digital standard
Fully compatible with MPEG-4 H.264/AVC High
Definition Digital TV
Fully compatible with MPEG-2 High Definition and
Standard Definition Output
Fully compatible with MPEG-1 Layer I & II, Dolby
Digital Audio
VHF & UHF input and LOOP OUT
Multi-bilingual OSD language , audio language and
subtitle language supported
1000 Channels capacity
Fully support to Electronic Program Guide(EPG)
Support Picture in Graphics(PIG)
Support Auto search and Manual search
Parental control for channels
Plug and Play installation with an ease to use Menu
System
Coaxial S/PDIF and optical S/PDIF Digital audio
output interface
Support 576i, 576P, 720P, 1080I Video Resolution
supported
Support 4:3 and 16:9 Aspect Ratio
Support EBU TELETEXT
DVB or EBU subtitle selected by the system based
on availability on the network
Various channel editing function(Favorites, Move,
Lock, Delete)
Support HDMI High Definition Multimedia
Interface(HDMI 1.3)
Software upgrade via USB2.0 interface
High sensitivity, low Eb/No for receive Digital Televi-
sion
USB 2.0 interface PVR and media player
Record digital television FTA program to a USB Flash
Drive or an external USB portable
hard disk and playback via USB2.0
• Connect the cable from the satellite antenna to
ANT IN with connector
• Connect RCA VIDEO/AUDIO jack to TV
• You can connect an optical/coaxial single cable
from the SPDIF/DIGITAL AUDIO socket on the
STB to a Hi-Fi system equipped with digital audio
input. This output is also used for connection to an
external Dolby digital decoder.
POWER: Power ON/OFF.
CH+: This button makes you change to previous
channel or move to the upper item in the menu.
CH-: This button makes you change to next channel
or move to the item in the menu.
LED INDICTAR:
RED: The receiver is standby.
GREEN: The receiver is working normally.
USB2.0: PVR Ready and Software upgrade
RF IN: To be connected to the LNB output.
RF OUT: Output of Digital Terrestrial TV Broadcast
signal
AC90-240V 50-60Hz: To be connected to the 90-
240V, 50-60Hz AC power.
TV SCART: TV SCART Video output
HDMI: Digital HDTV video output with HDCP.
S/P DIF: Output for connection to a digital amplifier.
MUTE: Used to enable or disable the audio.
: For switch your receiver on from stand by or off
to stand by.
TV / RADIO: Receiver switches between TV and
Radio mode.
NUMERIC KEYS: Used to select channels or enter
programming parameters.
RECALL: Return to the previous menu or switch to
the last view channel.
MENU: Display the Main Menu on the screen.
EXIT: Cancel the user selection and return to the
viewing mode from a menu.
FAV: To entry and display favorite channel list
EPG: Display the TV/Radio Program Guide
VOL+/-: Move left of right highlight marked cursor.
And increase or decrease the volume.
CH+/-: Move up or down highlight marked cursor.
GENERAL INFORMATION
Connecting to Digital Receiver
Front Panel Information
Rear Panel Information
Remote Control Unit