Sundance SMT8121 - Manual (Page 12)

Figure 6: overview of the SMT8121
The input signal applied to the input of the Analog to Digital converter is digitalized
and the samples are sent to the Digital to Analog Converter which generates the
output signal.
Processing takes place in FPGAs and in DSP. Applications are developed using
3L
Diamond design tool which allows easy implementation of the algorithm on the DSP
and FPGAs of the system.
6 The SMT8121 system
The system is made of one SMT395, one SMT391 paired with an SMT368 and one
SMT381 paired with an SMT368A. The modules are held on an SMT310Q PCI carrier
board.
Figure 7: hardware description of the SMT8121
Application Note SMT8121 Page 12 of 26 Last Edited: 19/02/2009 16:32:00