Sundance SMT8096 - Manual (Page 6)

Version 1.2 Page 6 of 13 SMT8096 User Manual
The SMT8096 development platform supports the design and development of a wide
range of radio and waveform applications. It can be used for prototyping
communication systems, third and fourth generation wireless architecture as well as
MIMO structures.
This document is an installation guide for the SMT8096 demonstration system.
Documentation and source files are installed by the way of the SMT6600 package,
which is the Sundance DAQ package. Source and application files provided are
to be run by the way of 3L Diamond Server only.
The SMT8096 application gets the DSP on the SMT395-VP30 to configure the DAC
of the SMT350 to generate a continuous sine wave via a first SHB connection. DAC
outputs are loop onto the ADCs inputs. The DSP grabs data from both channels and
stores them into a file, which can be read by a Matlab application for data displaying
and FFT processing. Sampling clocks (122MHz for the ADCs and the DAC) are
generated by on-board VCXO locked onto an on-board reference clock.
Architecture.
The following diagram shows the architecture of the SMT8096 system: