Sundance SMT8101 - Manual (Page 14)

Version 1.3 Page 14 of 16 SMT8101 User Manual
Software applications.
3L application.
In a sub-folder labelled 3L (directory SMT6600\Systems\SMT8101), you will find a C
(SMT8101.c), a configuration (SMT8101.cfg) and a make (nmake) files.
In a DOS prompt window, simply type nmake to generate the 3L application file,
which can be loaded into the SMT395-VP30 by using the 3L Server (3L Diamond
needs to be installed first).
This application allows the user to execute simple commands such as configuring the
ADC (output format and scale), the clock synthesizers, clock routing, capturing data,
etc.
Description of the functions in the test software menu.
The 3L application provided with the system allows the following option. Some will
prompt for a value.
“Configure the FPGA of the SMT391-VP”
This command is used to reprogram the SMT338-VP (second TIM site - SMT391-VP)
FPGA with a different/new bitstream.
“Configure the FPGA of the SMT381-VP”
This command is used to reprogram the second SMT338-VP (second TIM site -
SMT381-VP) FPGA with a different/new bitstream.
“Retrieve configuration of both FPGAs”
This command is used once the FPGAs have already been configured and a reset
has occurred. It sends an ‘END KEY’ (please refer to SMT338-VP User Guide) to
retrieve the FPGA configurations previously loaded.