Sundance SMT8091-395VP - Manual (Page 10)

Version 1.0 Page 10 of 12 SMT80901_395VP20 User Manual
The following picture shows the Comport connection at the back of the SMT310Q.
Note that the FMS are ‘twisted’, i.e. one end should be blue and the other should
show silver pins.
Software applications
You require Diamond version 3 or later to be able to run the application provided in
the SMT6600 package. If you have a previous version of Diamond, you may need to
recompile the application.
3L application
In a sub-folder labelled 3L (directory SMT6600\Systems\SMT8091_395VP), you will
find a C (SMT395VP_391.c), a configuration (SMT395VP_391.cfg) and a make
(nmake) files. Make sure the SMT395VP has been configured with the 32-bit SDB
interface of the firmware.
In a DOS prompt window, simply type nmake to generate the 3L application file,
which can be loaded into the SMT395VP by using the 3L Server (3L Diamond needs
to be installed first). Make sure that all the libraries located in the Lib folder are
properly compiled (if the nmake reports errors relevant to these libraries please
recompile the source located in the Source folder. You simply have to run the
Makefile with the nmake provided).
This application allows the user to execute simple commands such as configuring the
ADC (output format and scale), the clock synthesizers, clock routing, capturing data,
etc…