Figure 2 matlab window, Figure 3 parameters, Figure 2 matlab window figure 3 parameters – Sundance SMT6050 User Manual

Page 14

Text mode
Original mode

Version 1.0

Page 14 of 20

SMT6050 User Manual

1- Start Matlab.
2- In the Matlab command window, change the directory to the 370_realtime

directory.
cd C:\ Sundance\demos\370_realtime
Or at the top of the Matlab window there is a tab that says current directory. The
directory can be changed there rather than typing the address each time.

3- Type open demo370dsp.mdl in Matlab command window. The following window

should appear:

Figure 2 Matlab Window

4 - Double click on smt370. The following dialogue box will appear.

Figure 3 Parameters

4- Make sure that the path to pattern File is correct and pattern file is available.
5- From this window menu, select: Simulation-> configuration parameter